Molten Deoxidizer Description: The deoxidizer for powder (particle) state, strong oxygen capacity, low-cost alternative to the traditional process of deoxidation aluminum ingots, aluminum block, aluminum and some ferroalloy. This product is in steel deoxidation process, enabling complete deoxidation of liquid steel, liquid steel deoxidation products floating aggregates; according to the initial oxygen, the oxygen end of the appropriate join the product. Meanwhile in deoxygenated and effective control due to deoxygenation generated bubbles and sets the eye, thus making the control of liquid steel composition stability (especially Si), while, on the lining and the bag is lined with good protection, further reducing costs. Features: 1, a significant reduction in the cost of deoxygenation, even more than half. 2, instead of aluminum and iron alloy, reduce consumption, save energy and protect the environment. 3, improve the utilization of calcium oxide. 4, the formation of basic slag, protection and refractory lining, reducing erosion. 5, polyethylene slag effective, conducive to slag. 6, foaming speed, the formation of foam in LF furnace slag, steel shorten the time to protect the electrodes, reducing the noise in the steelmaking process. Incorporation: Before adding a steel ladle, add the amount of steel according to the initial oxygen, the oxygen end of the case may be, and determine the specific amount required to provide data based steel mills. According to experience, more than 35% of the aluminum-containing products and deoxygenation ingots, aluminum block and other 1: Add 1 to achieve the same oxygen effect.